CHOOSE YOUR DESIRED HEIGHT IN THE OPTIONS BELOW
This kit includes all the frame parts, wiring (extruder/x axis motor/endstop), and lead screw to extend the height and build platform the Ender 3 to either 400 or 500mm.
Picture indicates finished product; printer not included.
Kit contents:
2 - aluminum extrusion (Z axis)
1 - lead screw (For Ender 3)
1 - Wiring harness for extruder/X axis motors+X axis end stop
1 - Hot End/Fan/etc extension wires (300mm). Some soldering may be required for the hot end heater and fan wires. We do not include solder-less couplers, but you may find them on Amazon or your local hardware store.
NOTE: You are changing the build size of your printer. You will most likely need to update your firmware. If you do not know how to do that, then please learn that process before building this kit. Ender Extender is not responsible for your ability or inability to update your machine's firmware. There are a ton of resources online to guide you through that process.
Note **: Actual print height may be less than 500 depending upon the arrangement of the X/Extruder motor wiring harness and other options installed on your printer. We do not guarantee final 500mm build height.
No BLTouch wire extension is included in this kit.
Installation Guides
https://enderextender.com/pages/installation-guides
CR6SE Owners: This kit should fit your CR6-SE, however, you must choose the correct model to include the additional lead screw. The Ender 3 kit only includes one lead screw.