Extend the capabilities of your Creality Ender 3 3D Printer to an impressive 400mm (X) 400mm (Y) 500mm (Z) printing platform.
This kit includes all the frame, hardware, belts, wires and build platform parts necessary to extend the height and build platform the Ender 3. There may be a week delay in shipping due to volume.
(Picture shows printer; printer is not included. This is for a DIY kit which includes frame parts, build plate and screws/nuts/washers to assemble onto your existing Ender 3 printer)
Picture indicates finished product; printer not included.
1 - 400x400mm aluminum plate; four holes drilled and counter-sunk for attachment to existing Ender 3 heated build palte
1 - 1 meter length wiring harness for extruder motor/X-axis motor/x-axis end stop
1 - 3D printed motor mount for Y axis motor (non-pro only)
1 - 3D printed Y axis belt tensioner bracket (non-pro only)
1 - 4040 aluminum extrusion (Y Axis; pro only)
1 - 2040 aluminum extrusion (Y Axis; non-pro only)
2 - 2040 aluminum extrusion (Z Axis)
3 - 2020 aluminum extrusion (top, bottom rear, bottom front)
1 - 2020 aluminum extrusion (X axis)
1 - X axis 2GT-6mm belt
1 - Y axis 2GT-6mm belt
1 - Lead screw
1 - bag of screws, nuts, washers
1 - 14 awg (36" / 1000mm length) silicone coated wire for power supply
1 - 14 awg (12 inch / 300mm length) silicone coated wire extension for heated bed
1 - 26 awg wire extension for bed thermistor
1 - 500mm ptfe tube
** This kit does not include hotend wire extensions or BLTouch extensions. You most likely will not need these if you read and follow the install guide and use the external LCD enclosure. If you perform other configurations you may need additional wires or lengths not provided in the kit.
You should plan on acquiring a flat build surface such as a mirror or glass, about 400 x 400mm or 16" x 16"). It is not possible for me to source perfectly flat aluminum plates at this price.