This conversion kit will replace the round smooth rods with 2020 extrusion. In addition to the kit contents, you will need four v-wheel gantry carts as linked below
https://www.zyltech.com/pre-assembled-gantry-carriage-kit-for-2020-v-groove-extrusion/
https://www.amazon.com/s?k=v-wheel+plate+2020%2Cv+slot+gantry+plate
Optionally, you can buy some linear rails and make some printed 2020 mounting adapters.
Included in the kit:
- 4x 2020 @ 620 mm
- 2x 2020 @ 445 mm
- 12x M5 x 8mm hex button head cap screws
- 4x M5 x 16mm hex cap screws
- 16x M5 T-Slot nuts
- 16x M5 lock washers (we use internal star lock washers)
- 2x 3D printed lead screw block (ABS preferred)
- 2x Lead screw nut (two start)
- 8x M3 x 8mm hex cap screw